As all automatic gates are actually classed as machines under the EU Machinery Directive 98/37/EC, it is important that all manufacturers, suppliers, installers and users of automatic gates ensure that they comply with the directive. As part of this requirement suitable safety edges must be fitted.
The ExpertLine or ClickLine range of safety edges are suitable for swing gates installations with the wide range of sizes we have on offer. The safety edges status for swing gates can be monitored using the XRF wireless switching solution where the safety edges are connected to radio linked transmitters which are monitored for safety edge actuation or system malfunctions. Alternatively, ESGate wired switching units can be used where direct wiring is possible..
In addition to wired and wireless switching units, we also have a range of vehicle detectors to trigger the opening or closing of the gate installation. These include microwave motion sensors, inductive loop detectors, magneto-resistive sensors and simple photoelectric sensors.
Please note, the safety edges suggested in this section are based on typical products used for sliding gates and it is imperative that you carry out a full risk assessment to determine the requirements for your installation. To help you with selecting your safety edge, have a look at "Selecting a Safety Edge" for additional information.