From the Bircher ExpertLine range of safety edges, the 74 x 30 mm profile is an alternative to the original ClickLine 65 x 36 mm safety edges. It has the advantage of a wider operating area, is more sensitive with a greater overtravel figure of 42 mm. This profile is ideal for a range of applications including automatic gates, automatic doors, lifting platforms and AGVs.
What's included in the safety edge kit from Motion29?
We supply the profile and aluminium cut to the correct length for a 1500 mm safety edge – please note this is 24 mm shorter than the finished length to accommodate the end connector and end cover.
You will receive a pair of contact end connectors, a pair of end caps, an 8k2 resistor and a 5 metre double ended cable.
To shorten the safety edge, we recommend the use of rubber profile cutters.
If you require a different size of safety edge, visit our Made to Measure Bircher ExpertLine Safety Edges page where you can specify the exact length of safety edge require and add the connectivity required for your project.
- Safety Edge Size 74 x 30 x 1500 mm
- EPDM and aluminium profiles cut to length for 1.50 m safety edge
- Activation Force < 45 N
- Pre-Travel Distance < 4.0 mm
- Overtravel at 400 N of > 42.0 mm
- Supplied with 8k2 resistor and 5 m double ended cable
Normally ships in 1 to 2 days
