LR6 Ø60mm, Off-WHITE Base 100-240Vac Pole/Cir Base & Cable

The Red LED module, is colour coded to match the LED output, so that you can clearly see if the module is illuminated or not. It is controlled by the red wire in the connecting cable.

• Sealed waterproof to IP65.

• Bright and clear Red LED module.

• Red coloured LED & module body.

The Amber LED module, is colour coded to match the LED output, so that you can clearly see if the module is illuminated or not. It is controlled by the orange wire in the connecting cable.

• Sealed waterproof to IP65.

• Bright and clear Amber LED module.

• Amber coloured LED & module body.

The Green LED module, is colour coded to match the LED output, so that you can clearly see if the module is illuminated or not. It is controlled by the green wire in the connecting cable.

• Sealed waterproof to IP65.

• Bright and clear green LED module.

• Green coloured LED & module body.

The Blue LED module, is colour coded to match the LED output, so that you can clearly see if the module is illuminated or not. It is controlled by the blue wire in the connecting cable.

• Sealed waterproof to IP65.

• Bright and clear blue LED module.

• Blue coloured LED & module body.

The White LED module, is colour coded to match the LED output, so that you can clearly see if the module is illuminated or not. It is controlled by the white wire in the connecting cable.

• Sealed waterproof to IP65.

• Bright and clear white LED module.

• White coloured LED & module body.

An Off-White coloured buzzer/sounder unit with all-round 360º sound output at 88 dB. It has been optimised for use in industrial and machine environments and has a choice of 4 different alarm patterns controlled by DIP switch settings :-

1) Rapid Intermittent Beep.
2) Continuous Beep.
3) Rapid Hi-Low Beep.
4) Sweep Sound.

The buzzer unit provides the control for flashing the LED signal lights, giving a flash rate of 60 ±2 Flashes per minute.

• Controlled by single input.

• Sealed to IP65 when assembled.