AR-024 Occupancy sensor for zone 2 and zone 22
The explosion-safe Artidor AR-024 occupancy detector is based on passive infrared technology and capable of detecting movements of heat sources. Thanks to the wide opening angle and its 10 m range, this detector is suitable for monitoring large areas.
The occupancy detector is designed for use inside large buildings for example warehouses and combines energy saving and the protection of the environment in addition to convenient lighting.
Motion detectors switch the light depending on movements and the ambient light. The sensor itself does not emit any radiation and is therefore called “passive”. Unlike motion detectors, occupancy detectors can also switch off lighting if there is sufficient daylight, because of their advanced mixed light measurement (the principle on which occupancy detectors are based). Do not install detectors near heat sources like air-conditioning units, lights or radiators. The sensor electronics offers a potential free contact for switching up to 1,150 VA load.
The occupancy detector is mounted on top a coated aluminium housing. The explosion safety to gas and dust is arranged by the appliance of protection degrees against ignition "Increased safety", “Moulding” and “Protected by enclosure”.
The Artidor occupancy detector is certified in accordance with the European ATEX Directive 2014/34/EU (ATEX 114) for use in gas or dust hazardous areas and is CE marked.
FEATURES
- ATEX-certified
- Suitable for use in locations with gas and dust, zone 2 and 22
- Ingress protection level IP65
- Coated aluminium housing
- Registration angle circular 360°
- Range of coverage 24 x 44 m
- Dimmer setting 10 – 2.000 Lux
- Pre-set time 15 seconds – 30 minutes
- Mounting height 2 – 10 m
- Mounting bracket included, adjustable